SWA10風速探頭
壓力范圍:-300…1500Pa
±1% 讀數值,*小誤差±0.3Pa
*大壓力過載:±20000Pa
位置關系數: 0.6 Pa(非SAFE測量狀態)
溫度關系數: 0.2Pa/°C
可測量干燥和濕潤的空氣,其它不活潑氣體
輸出:1 mV / Pa, 100mV / m/s
探頭校正,建議每12個月一次。
|
可伸縮式風速探頭SWA 31
SWA 31是一種可伸縮的風速/風溫探頭,必須與Swema 3000連接。它同時測量風速和溫度時,具有溫度補償功能。 SWA 31有6種不同的程序可以使用,計算平均值,*大值,*小值和標準偏差。Swema 3000記錄本有1600份報告或12000對測量數據的容量。
|
葉輪式風速探頭,直徑16mm,含帶刻度及測量按鈕的伸縮手柄 - for ventilation ducts
Use the vane/temperature probe (16 mm diameter) to determine flow velocity or volume flow in ventilation ducts (e.g. during the maintenance, evaluation and commissioning of ventilation systems). It is particularly suitable for medium flow velocities up to + 50 m/s and delivers optimum results. The vane anemometer can also measure temperatures
|
葉輪風速探頭,直徑60mm,帶伸縮式手柄 - for flow measurements at air outlets
Use the 60 mm vane probe to determine flow velocity and volume flow at ventilation outlets or duct outlets.
The vane anemometer is equipped with a telescope, which can be extended to 910 mm.
|
SWA07風速探頭
壓差:-7000 Pa…+7000Pa
*大過載:-35000 Pa…+35000Pa
精度:±1 Pa 或±2%讀數值
在歸零后: ±0.3 Pa 或±1%讀數值
位置關系數: 大約 5 Pa
溫度關系數: 0.4 Pa/°C
|
葉輪風速探頭,直徑16 mm ,帶伸縮式手柄,例如測量管道 - for flow measurements in ducts
Use the 16 mm vane probe to determine flow velocity or volume flow in ventilation ducts (e.g. during the maintenance, evaluation and commissioning of ventilation systems). It is particularly suitable for medium flow velocities up to +40 m/s and delivers optimum results.
The vane anemometer is equipped with a telescope, so it is con
|
葉輪式風速探頭,直徑100mm,可配合與風量罩使用,用于風量測量,需配連接電纜0430 0100 - 適用于出風口產品描述
葉輪式風速探頭,直徑100 mm,可配合與風量罩使用,用于風量測量,需配連接電纜 0430 0100
葉輪式風速探頭直徑100 mm
請注意:需配連接電纜0430 010
|
專線風速探頭,測量風速和溫度,探頭**直徑7.5 mm,帶伸縮式手柄(max.820mm) - for flow and temperature
產品描述
專線風速探頭,測量風速和溫度,探頭**直徑7.5 mm,帶伸縮式手柄(max.820mm)
產品包含
Hot wire probe (? 7.5 mm) with telescope (can be extended to 820 mm) including fixed cable 2.4 m.
|
專線式風速探頭,直徑10mm,90度可彎曲,含帶刻度及測量按鈕的伸縮手柄,需配連接電纜0430 0100 - for flow, temperature, humidity and pressureThe probe offers maximum digital measurement reliability. The digital probe allows readings to be processed directly in the probe. This technology eliminates instrument measurement uncertainty. The probe can be returned on its own (without the measuring instrument) for calibration. Calculating the de
|
SUMMIT-575轉輪風速探頭SUMMIT575制造廠家價格750
|